| Customization: | Available |
|---|---|
| Output Type: | Single Output |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| MODEL | S-500-12 | S-500-24 | S-500-36 | S-500-48 | |
| OUTPUT | DC VOLTAGE | 12V | 36 V | 36 V | 48V |
| RATED CURRENT | 40A | 20A | 13.4A | 10A | |
| CURRENT RANGE | 0~40A | 0~20A | 0~13.4A | 0~10A | |
| RATED POWER | 480W | 480W | 482.4W | 480W | |
| RIPPLE & NOISE (max.) Note.2 | 150mVp-p | 150mVp-p | 240mVp-p | 240mVp-p | |
| VOLTAGE ADJ. RANGE | 10-13.5V | 20 ~ 26.4V | 32-40V | 41 ~ 56V | |
| VOLTAGE TOLERANCE Note.3 | ±1.5% | ±1.0 | ±1.0% | ±1.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | +0.5% | |
| LOAD REGULATION | ±1.0% | ±0.5% | ±0.5% | ±0.5% | |
| SETUP, RISE, HOLD TIME | 1000ms,50ms/230VACatf | ||||
| HOLD UP TIME (Typ.) | 20ms/230VACatf | ||||
| INPUT | VOLTAGE RANGE | 180~264VAC 254~370VDC | |||
| FREQUENCY RANGE | 47~63Hz | ||||
| EFFICIENCY(Typ.) | 82% | 86% | 87% | 87% | |
| AC CURRENT | 5A/230VAC | ||||
| INRUSH CURRENT(max.) | 60A/230VAC | ||||
| LEAKAGE CURRENT | <3.5mA/240VAC | ||||
| PROTECTION | OVERLOAD | 105 ~ 135% rated output power | |||
| Protection type : Constant current limiting, recovers automatically after fault condition is removed | |||||
| OVERVOLTAGE | 13.8-16.2V | 27.6 ~ 32.4V |41.4~46.8V |57.6~ 67.2V | ||||
| Protection type :Shut down O/P voltage, re-power on to recover | |||||
| OVER TEMPERATUR | RTH1 85'C Detect on case | ||||
| Protection type: Shut down O/P voltage, recovers automatically after temperature goes down | |||||
| FUNCTION | FAN ON/OFF CONTROL(Typ.) | RTH2^55C FAN ON,<50C FAN OFF | |||
| ENVIRONMENT | WORKING TEMP. | -20 ~ +60°C (Refer to output load derating curve) | |||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||||
| STORAGE TEMP., HUMIDITY | -20-+85°C,10~95%RH | ||||
| TEMP. COEFFICIENT | ±0.03%/°C (0~50°C) | ||||
| VIBRATION | 10 w 500Hz, 3G 10min./1 cycle, 60min. each along X, Y, Z axes | ||||
| SAFETY | SAFETY STANDARDS | UL60950-1 approved | |||
| WITHSTAND VOLTAGE | l/P-0/P:1.5KVAC l/P-FG:1.5KVAC O/P-FG;0.5KVAC | ||||
| ISOLATION RESISTANCE | l/P-O/P, l/P-FG, O/P-FG:100M Ohms/500VDC / 25°C/ 70% RH | ||||
| OTHERS | MTBF | 234.3K hrs min. MIL-HDBK-217F (25°C) | |||
| DIMENSION | 238*124*65mm (L*W*H) | ||||
| PACKING | 1.45kg/9Pcs/14kg | ||||
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Please connect positive pole of input voltage with mark uLa of terminal block, connect negative pole of input voltage with mark "NH of terminal block, using DC voltage for input voltage. |
||||
){kind=link}